© AlcoTech copyright
25 mm guide-bushing
Shock absorber spare parts - Internal parts
€3.27 - €6.53
25 mm guide-bushing - 25 x 27 x 13 (SP-UN03371) SP-UN03371
€6.53 (In Stock)
25 mm guide-bushing - 25 x 27 x 15 (SP-UN03372) SP-UN03372
€6.53 (In Stock)
25 mm guide-bushing - 25 x 28 x 5 (SP-UN03373) SP-UN03373
€3.27 (In Stock)
25 mm guide-bushing - 25 x 28 x 10 (SP-UN03374) SP-UN03374
€3.27 (In Stock)
25 mm guide-bushing - 25 x 28 x 12 (SP-UN03375) SP-UN03375
€3.27 (In Stock)
25 mm guide-bushing - 25 x 28 x 15 (SP-UN03376) SP-UN03376
€3.27 (In Stock)
25 mm guide-bushing - 25 x 28 x 25 (SP-UN03378) SP-UN03378
€3.77 (In Stock)
25 mm guide-bushing - 25 x 28 x 30 (SP-UN03379) SP-UN03379
€3.89 (In Stock)
25 mm guide-bushing - 25 x 28 x 40 (SP-UN033710) SP-UN033710
€4.01 (In Stock)
25 mm guide-bushing - 25 x 28 x 50 (SP-UN033711) SP-UN033711
€4.15 (In Stock)
25 mm guide-bushing - 25 x 29 x 10 (SP-UN033712) SP-UN033712
€3.27 (In Stock)
25 mm guide-bushing - 25 x 29 x 12 (SP-UN033713) SP-UN033713
€3.27 (In Stock)
25 mm guide-bushing - 25 x 29 x 15 (SP-UN033714) SP-UN033714
€5.53 (In Stock)
25 mm guide-bushing - 25 x 29 x 20 (SP-UN033715) SP-UN033715
€5.66 (In Stock)
25 mm guide-bushing - 25 x 29 x 20 (SP-UN033715) SP-UN033715
€5.66 (In Stock)
Part no. SP-UN03371 | SP-UN03372 | SP-UN03373
SP-UN03374 | SP-UN03375 | SP-UN03376 | SP-UN03377
SP-UN03378 | SP-UN03379 | SP-UN033710 | SP-UN033711
SP-UN033712 | SP-UN033713 | SP-UN033714 | SP-UN033715
Steel guide bushings with high-quality internal coating, selected from the best standardized products as well as those produced to AlcoTech specifications. The PTFE-based sliding surface allows for operation with a low coefficient of friction (minimized stick-slip effect) and reduces wear on the counter-surface.
Features:
- Static load limit: N/mm² 250
- Dynamic load limit: N/mm² 140
- Allowable sliding speed: m/s 2.0 (p = 1.0)
- Coefficient of friction: m 0.02 - 0.25
- Operating temperature: -200° / +280°C max
- High chemical resistance
- Thermal stability
- Maintenance-free
- Shaft tolerance: f7 – h8
- Housing tolerance: H7
- Shaft roughness: Ra, µm 0.05 - 0.5
- Shaft hardness: HB 300 – 600
